Cuusoo Wiki
-The Legend of Zelda Project-
General Information

Project ID




Icn support

9,979 supporters

Icn comment


Icn bookmark

26 bookmarked

Icn view

372,700+ views

- The Legend of Zelda Project - is an Archived project on LEGO CUUSOO created by Ragaru on April 24th, 2012.  The project reached Achieved stage on February 7th, 2013, a day after the Andy/Bugdroid the Android by Google project reached 10,000 supporters. It is the 18th project on LEGO CUUSOO to reach Achieved stage. It has 6,083 comments making it the third most commented-on project of all time. As of the time when it reached 10,000, it was the most supported, most commented-on, and most viewed project still in Idea Stage.

The project was rejected and Archived when the Review results for Winter 2012, Spring 2013, and Summer 2013 were announced, on October 23rd, 2013.

This message was written by the creator of the project. Do not modify the message in any way.

The LEGO: “Legend of Zelda” Project

A second attempt to bring Zelda and LEGO together as one!

And for the sake of every Zelda and LEGO fan, support WesTalbott's wonderful Ocarina of Time based LEGO Project, Iron Knuckle Encounter


Also check out my little Zelda Animation!

Please note before commenting:

-The models displayed are made using LEGO Digital Designer, the non official LEGO parts/designs were made using image editing software, more specifically Adobe Photoshop CS4.

-As for you believing this to be a copy of Michael Inglis (Mingles) marvelous Zelda Project, you are wrong! I started planning and designing ideas for this project, as far back as early December 2011, before Mingles' project was up. Nor is it the same direction as Mingles chose, I aim for a more realistic Zelda style, such as The Legend of Zelda: Twilight Princess presented.


With Mingles' Zelda Project failing to pass the review, the weight of his project has now fallen on this one. Having new parts that would be essential to fulfill the project/set's vision is what caused Mingles' project to fail, therefore I will firstly see what is possible to produce with the existing parts and colors, before I suggest any new pieces that would be required to fulfill this project.

I will rather rely on prints(or stickers should it prove to be the only way), to achieve the most authentic Zelda LEGO, following the CUUSOO standards. That by an average, leaves a set consisting of 425 pieces, but in the case of extensive figure design (body, head and equipment/gear prints) it will most likely reduce the set to 1 standard Minifigure, some enemies, and an environment suitable for the context. This is to assure that this project will have a greater chance of fitting within the CUUSOO budget.


In the time forward I will, do what I can with the time I have, in order to present a final product prototype. But as I wish to help this become the most ideal set for all Zelda/LEGO fans out there, I appreciate constructive critic so that I can improve it towards something that everyone would want.

This is however something I can not promise, as we will have to settle with a visual style, to avoid any conflicts with the context of the franchise. As I believe that it in Nintendo's eyes would be a negative point to have elements from different games put together in one style, as Nintendo is very strict when it comes to the licensed product quality checks.

So that being said, I would like to express my current plans and ideas.

Visually I will most likely settle with the Twilight Princess direction, as it holds a greater focus on details, and the colors are bleaker which as a set answers to the direction we have seen in more recent licensed themes such as The Lord of the Rings and The Hobbit, and Pirates of the Caribbean, which I personally find very appealing.

Many would want Ocarina of Time, Wind Waker or Skyward Sword variations of the characters. I would personally prefer a set featuring the final battle from Ocarina of Time with a brick built Ganon (which I to some extent have experimented with), due to the the sheer scale and epic feeling the battle in itself was... But as I've stated, TP appeals strongest to me visually so that is what I will put forth as a suggestion.




(I must apologize for the chaotic and sketchy layout, time really isn't on my side.)

With the new Olive Green introduced in 2012 I find it to be a perfect match for Link's Hero Tunic! The torso, legs, and face prints are the most likely ones to be produced, but I would hope for printings on the arms and the sides of the legs as well. The face may feature two different versions, one of the game accurate rendition, and one of a stylized LEGO version, this to meet the desires among the fans.

The cap/hair piece is the greatest dilemma of this entire project, no existing LEGO piece features the quality of both such hair and a cap, so it will either be a hairless cap wearing Link, or a Link with no cap at all. One option is to have the hair printed onto the face, but from my point of view, it is not proving a suitable solution, an unique face print, may by many be desired for other use than just Link, and it may prove somewhat versatile.

If possible, I would suggest one single hairpiece with cap to be produced, alternately if the design itself should not prove versatile enough for LEGO's part gallery, then, although unlikely, it could be 2 separate parts. One hairpiece that could go along LEGO's standard collection of hair, and one cap piece that could be connected on top of it.

Connection methods could either be like the LEGO Friends hairpieces, with a tiny peg hole in the hair and a peg on the headgear. Or better, a slightly wider peg so that the cap can fit into the stud of a minifig head alone, and easily any other part that has the same diameter.

I see the latter option as the most versatile and attractive one as It would give one new hair type, and a cap that could be used for Medieval/Fantasy themes.

The truth is, despite the grand selection of parts LEGO has, there really aren't a good option to these kind of pointy caps, and seeing how popular the Zelda theme is here at CUUSOO, having such a piece realized would allow many ideas to more easily be made a reality.

And so far, with 144 unique collectible minifigures produced the last 3 years, we haven't seen any part that could at all be similar to the iconic silhouette of a pointy cap such as Link's. The "Gnome" minifig may be the only of similarity, but the shape is entirely wrong. Such a Cap piece could suit Goblins, Dwarfs, Elves, Wizards and so on!

The Master Sword is another yet minor problem, as the only sword holding some similarities is a shortsword, originally introduced among some of the LEGO Heroica sets. The alternative may be to use the more recent longsword, commonly seen in the LotR sets. It does as well have a striking similarity to the more traditional looking "Ordon Sword" from Twilight Princess.

The Hylian Shield, will simply require a printed triangular shield in a metallic color.

As for carrying his equipment, I have not found any practical or visually appealing way to store them on his back.

Concerning the tunic's lower part, it may be a simple print, but it could in addition be possible to use a cloth piece, such as the Collectible Minifigure Bagpiper's kilt in Olive Green, or the Hula Dancer's skirt... Including both would be the best solution.

The legs should preferably be in brown, because the boots would be in their natural color and would cover all the sides, which looks more natural as the underside of the foot would be in the correct color. The downside is that the lighter beige color of his pants/tights may be somewhat transparent due to the darker underlying color of the plastic. But if in beige, it would require a larger area of brown printing of the leg's surface.

- SET DESIGN - RagaruZelda2

This would be a more or less ideal set design, if an extensively detailed model could be produced. At least it would keep more of the Zelda essence and quality in the build.

The set is by itself not as important as the minifigure, it could simply be a small base with ruins to display the Link minifigure in all it's potential it's glory!

Unfortunately Zelda and Ganondorf will be excluded in order to increase the chances of this project passing review, as I believe Minifigures makes an impact on the budget CUUSOO currently operate at.

I've decided to take inspiration from the Ruins of the Temple of Time, found in the Sacred Grove, and a little from Hyrule Field where Link rides through the landscape on his trusted steed, Epona.

Which has lead to the current prototype you see presented.

It will feature an exterior and an interior, both with their respective type of enemies.

The exterior features a vicious carnivorous plant enemy known as Deku Baba, while the interior features one of the skeletal warriors known as Stalfos.

As for items I have chosen to include recurring items such as the Lantern, Bombs (which are effective against the Stalfos), and the Hero's Bow.

The interior will feature a chest containing an item, or a Dungeon Key, which Link must acquire in order to continue deeper into the dungeon.

In addition there will be the infamous Pots for Link to break without hesitation, climbing vines and the hostile spider enemies known as Skulltulas. RagaruZelda3

This is of course larger and more detailed than what an eventual set would be, so I will naturally have additional renditions of a smaller scale made accordingly to this design. Alternately include some design variation to apply playability to the scale that would best fit CUUSOO.

Here's one example of a simplified version: RagaruZelda4

This is a start, and we have to start somewhere, and what is better than The Green Clad Hero himself?

As I said, the Minifgure is the most important aspect of this project, and having just that one produced would allow The Legend of Zelda to spread throughout the world of LEGO!

And thinking further, should this project reach 10000 AND pass review, so that we finally could get our hands on them, well then there would be nothing stopping us from suggesting more Zelda sets, Temples, Dungeons, castles, bosses, moments from the Zelda universe that has stuck to our minds and in our hearts!

I have this as my current suggestion, hoping it may be the fire that will rise and expand trough the hearts of LEGO and Zelda alike, from the spark Mingles ignited, as a result of the genius of both Nintendo and LEGO!

Should it fail for reasons other than the license, then Wes Talbott's Project will be the next hope for the union of LEGO and Zelda.



This message was written by the LEGO CUUSOO Team. Do not modify the message in any way.

LEGO Review Results for The Legend of Zelda Project


First and foremost, congratulations to Ragaru for reaching 10,000 supporters on LEGO CUUSOO, and toward everyone for all of the support of The Legend of Zelda Project! The results of the LEGO Review are in and you can see full details on the LEGO CUUSOO Blog.

Review Results for The Legend of Zelda Project Our team has thoroughly considered the possibility of releasing this project as a LEGO set according to the criteria of the LEGO Review. Unfortunately the LEGO Review Board has decided that we will not produce this project as a set.

Thank you to Ragaru for the passion and creativity that went into this project, and to all of you who voted so that we would have the opportunity to consider this as a potential LEGO set. We’re sorry to deliver this disappointing news.

How do we arrive at our decisions? By gaining 10,000 supporters, a fan-submitted project moves from the Idea Stage to the Review Stage, where it earns the opportunity to be considered as a future LEGO® set in a quarterly process called the “LEGO Review.” Gaining 10,000 Supporters is just the first step in this process.

A "LEGO Review Board" composed of professional set designers, product managers, marketing representatives, and other key team members examine each qualified project. They build concept models and determine if the concept meets our high standards for what it takes to be a LEGO product; including factors such as playability, safety, and fit with the LEGO brand. Every potential LEGO product, including those developed internally, goes through a similar process and must meet the same standards.

The amount of time this takes varies due to all the factors involved. Unfortunately, this process sometimes means that well-conceived projects that gain just-as-passionate followings have to be turned down. Please note that the LEGO Review Board makes all final decisions on which new sets the LEGO Group will release based on CUUSOO projects.

This message was written by the LEGO CUUSOO Team. Do not modify the message in any way.

Congratulations on 1,000+ Supporters!


Congratulations on all of the support! Your artwork and your models are well done. We welcome your unique take on this famous game. No one fan can claim exclusivity on a project based on a license, so this and other Legend of Zelda projects may co-exist on LEGO CUUSOO with MINGLES' project that has already reached 10,000 supporters. Since your project features concept models that are distinct from MINGLES' work, you're already on the right track. Should this project reach 10,000 supporters, pending licensing we are open to evaluating the feasibility of another unique Legend of Zelda product. Keep going for the supporters. Good luck on your journey to 10,000!

This message was written by the LEGO CUUSOO Team. Do not modify the message in any way.

Congratulations on 10,000 Supporters, Ragaru!


Huge congratulations to Ragaru and all of the supporters of this LEGO® CUUSOO project. Your work provides another approach to the concept of a Legend of Zelda™ LEGO set and we admire that you have not allowed the results of the previous project to discourage your efforts.

While we cannot create new specific LEGO elements within the operational framework of LEGO CUUSOO, we will consider this concept in earnest in the Spring 2013 LEGO Review period.

What happens now? This project moves from the Idea stage to the Review stage. A "LEGO Review Board" composed of designers, product managers, and other key team members will examine the idea. We'll build concept models and determine if the concept meets our high standards for what it takes to be a LEGO product, including playability, safety, and fit with the LEGO brand. Every LEGO product goes through a process like this and must meet the same standards.

Timing of the LEGO Review This project qualifies for the quarterly review beginning in March, which will also include all projects that reach 10,000 between now and March 4. For more information about the quarterly review process, see this blog post.

The review is a thorough process and from its start, and can take several months. When finished, we make a "go/no go" decision to develop and sell a product based on the Legend of Zelda concept.

When the review is complete, we will inform you of our decision. If green-lit, this project goes into the longest phase of the project; the Development phase. During this time, LEGO model designers refine the product and develop it for release, we create the product materials (box, instructions, marketing), and get everything ready for a production run. This also takes several months.

We will post follow-up information and our decision here.

Lego Zelda A-100

One of the possible designs for the final set.